Technical Papers

Request a Technical Paper

ATA has been a leader in methods development for design, analysis, and test for more than 45 years.

As a result of this experience, ATA regularly produces technical papers and presents at conferences. Our
technical papers draw on our vast industry experience and cover topics in all areas of ATA business. Learn
more about our work by requesting a technical paper.
Gokce, A., S. Flores, J. Buck, P. Follansbee, S. Violette, and J. Radjavitch. Simulating the Response of a Multidirectional Composite Material Using the Enhanced Binary Model. AIAA Scitech, Kissimmee, FL, January 2018.
Grogan, K.P., and M. Ihme A New Ignition Time Model Applied to Super Knock. Proceedings of the Combustion Institute 000, 2018.
Kuether, R.J., and D.A. Najera-Flores Response Predictions of Reduced Models with Whole Joints. Proceedings of ISMA 2018 International Conference on Noise and Vibration Engineering and USD2018 International Conference on Uncertainty in Structural Dynamics, 2018.
Lacayo, R.M., and M.S. Allen Updating Structural Models Containing Nonlinear Iwan Joints Using Quasi-Static Modal Analysis. Mechanical Systems and Signal Processing 118, 2018.
Maricic, L.L., and R. Somawardhana CCHP Modeling in Siemens Simcenter and Correlation with JPL SWOT Mission Two-Phase Testbed. Thermal and Fluids Analysis Workshop, August 2018.
Najera-Flores, D.A., and A.R. Brink Efficient Random Vibration Analysis of Nonlinear Systems with Long Short-Term Memory Networks for Uncertainty Quantification. Proceedings of ISMA 2018 International Conference on Noise and Vibration Engineering and USD2018 International Conference on Uncertainty in Structural Dynamics, 2018.
Osterholt, D.J., and D. Cloutier. Using Manual Excitation for Large Displacement on a Highly Damped System. IMAC XXXVI, Orlando, FL, February 2018.
Papamoschou, D., D. Morata, and P. Shah Direct Spectral Estimation Method for Continuous Scan Beamforming. AIAA/CEAS Aeroacoustics Conference, Atlanta, Georgia, 2018.
Rupp, C., and L. Schweizer The Deployable Structures Library. Proceedings of the 1st American Modelica Conference, Cambridge, MA, October 2018.
Schoneman, J. Modal Analysis of Hypersonic Aerostructural Systems. IMAC XXXVI, Orlando, FL, February 2018.
Schoneman, J., C. Ostoich, L. Jarman, C. Van Damme, and M.S. Allen Linear and Nonlinear Reduced-Order Modeling for Hypersonic Panel Flutter. AIAA SciTech, Kissimmee, FL, January 2018.
Wang, W., J.V. Gray, S.E. Julien, and K.-T. Wan Mechanical Characterization of a Convex Shell (Contact Lens) with Meridional Thickness Variation. Experimental Mechanics, May 2018.
Weiss, A.D., M. Vera, A. Liñán, A.L. Sánchez, and F.A. Williams A Novel Formulation for Unsteady Counterflow Flames Using a Thermal-Conductivity-Weighted Coordinate. Combustion Theory and Modelling, Vol 22, No. 1, Jan. 2018..
Weiss, A.D., W. Coenen, A.L. Sánchez, and F.A. Williams The Acoustic Response of Burke–Schumann Counterflow Flames. Combustion and Flame, Vol 192, Jun. 2018.
Yang, M.Y., and M.T. Palodichuk Recommendations on Dynamic Pressure Sensor Placement for Transonic Wind Tunnel Tests. Noise and Vibration Emerging Methods (NOVEM), Ibiza, Spain, May 2018.

AWARD

George M. Low Award Recipient

ATA is a proud recipient of the prestigious George M. Low award, NASA’s premier quality
and performance award recognizing contractors for technical and business excellence.

LEARN MORE