Technical Papers

Request a Technical Paper

ATA has been a leader in methods development for design, analysis, and test for more than 40 years. As a result of this experience, ATA regularly produces technical papers and presents at conferences. Our technical papers draw on our vast industry experience and cover topics in all areas of ATA business. Learn more about our work by requesting a technical paper.

Mikellides, I., P. Shah, A. Robinson, Z. Strimbu, M. Stricker, D. Bernard, and A. Stelzner Modelling and Simulations of Particle Resuspension and Transport for the Assessment of Terrestrial-borne Biological Contamination of the Samples on the Mars 2020 Mission. Planetary and Space Science 2019.
Miskovish, R.S., and S.W. Miller Pressure-Based Venting Thermal Model for the Dream Chaser® Spacecraft Cargo System. Thermal & Fluids Analysis Workshop, August 2019.
Reveles, N., J. Schoneman, C. Rupp, and E. Blades Utilizing Analytic and Direct Methods for the Verification and Validation of Whirl Flutter Analyses. AIAA SciTech Forum 2019, AIAA 2019-1865, January 2019.
Schoneman, J. Aeroelastic Verification of a Dynamic Aerothermoelastic Analysis Framework. AIAA Scitech 2019 Forum, AIAA 2019-1119, January 2019.
Shah, P.N., A. White, D. Hensley, D. Papamoschou, and H. Vold Continuous-Scan Phased Array Measurement Methods for Turbofan Engine Acoustic Testing. Journal of Engineering for Gas Turbines and Power 141, August 2019.
Spivey, N., K. Miller, R. Saltzman, and K. Napolitano Modal Testing of a Flexible Wing on a Dynamically Active Test Fixture Using the Fixed Base Correction Method. International Forum on Aeroelasticity and Structural Dynamics, Savannah, GA, June 2019.
Yang, M.Y., and M.T. Palodichuk Recommendations on Dynamic Pressure Sensor Placement for Transonic Wind Tunnel Tests. Advances in Aircraft and Spacecraft Science, Vol. 6, No. 6, 2019.
Blecke, J., J. Freymiller, and M. Ross Off-Axis Input Characterization of Random Vibration Laboratory Data for Model Credibility. IMAC-XXXVI, Orlando, FL, February 2018.
Blelloch, P., E. Brandeau, and D. Kammer Uncertainty Quantification for Mars 2020 Powered Descent Closed-Loop Stability. AIAA SciTech Forum, Kissimmee, FL, January 2018.
Brink, A.R., D.G. Tipton, J.E. Freymiller, and B.L. Stevens Methods for Component Mode Synthesis Model Generation for Uncertainty Quantification. IMAC-XXXVI, Orlando, FL, February 2018..
Buck, J., D. Najera, D. Melville, and E. Jayson Prediction of Fiber-Reinforced Composite Material Properties Using Collaborative Filtering. Proceedings of the American Society for Composites—33rd Technical Conference, 2018.
Flores, S., A. Gokce, P. Follansbee, and S. Violette Simulating the Response of a Multidirectional Composite Material Using Machine Learning, Statistical Algorithms, and the Enhanced Binary Model. National Space and Missile Materials Symposium 2018.
Gokce, A., S. Flores, J. Buck, P. Follansbee, S. Violette, and J. Radjavitch. Simulating the Response of a Multidirectional Composite Material Using the Enhanced Binary Model. AIAA Scitech, Kissimmee, FL, January 2018.
Grogan, K.P., and M. Ihme A New Ignition Time Model Applied to Super Knock. Proceedings of the Combustion Institute 000, 2018.
Kuether, R.J., and D.A. Najera-Flores Response Predictions of Reduced Models with Whole Joints. Proceedings of ISMA 2018 International Conference on Noise and Vibration Engineering and USD2018 International Conference on Uncertainty in Structural Dynamics, 2018.

AWARD

George M. Low Award Recipient

ATA is a proud recipient of the prestigious George M. Low award, NASA’s premier quality
and performance award recognizing contractors for technical and business excellence.

LEARN MORE