Technical Papers

Request a Technical Paper

ATA has been a leader in methods development for design, analysis, and test for more than 45 years.

As a result of this experience, ATA regularly produces technical papers and presents at conferences. Our
technical papers draw on our vast industry experience and cover topics in all areas of ATA business. Learn
more about our work by requesting a technical paper.
Walters, D. K., and E. L. Blades. Assessment of Hybrid and Zonal Wall Functions for Missile Aerodynamic Simulations. Progress in Computational Fluid Dynamics 11, No. 6, (2011): pp. 335-349.
Yang, M.Y., H. Vold, and P.N. Shah. Measurement and Propagation of Supersonic Aeroacoustic Noise Sources Using Continuous Scanning Measurement Technologies and the Fast Multipole Boundary Element Method. 162nd Meeting of the Acoustical Society of America, San Diego, California, October–November 2011.
Blades, E., S. Miskovich, P. Shah, and E. Luke. A Coupled Multiphysics Analysis for Hypersonic Vehicle. Proceedings of the NASA Thermal and Fluids Workshop, 2010.
Briggs, C. Flexible Multibody Analysis of a Wing Flap Drive Mechanism. Siemens PLM Connection Americas User Conference, 2010.
Hoople, G., and B. Fladung WB-57 Gross Weight Increase Flight Testing. AFDC, 2010.
Hoople, G., and K. Napolitano. Implementation of Multi-Sine Sweep Excitation on a Large-Scale Aircraft. 28th International Modal Analysis Conference (IMAC), Jacksonville, Florida, February 2010.
Hoople, G., K. Napolitano. Order Tracking with Multi-Sine Excitation on a Ground Vibration Test. 28th International Modal Analysis Conference (IMAC), Orlando, FL, Feb 2010.
Knutson, K. Interactive Narratives, Using TC 8.1 with NX7.5 for CAE. Siemens PLM Connection Americas User Conference, 2010.
Knutson, K. Transitioning to NX CAE from I-deas. Siemens PLM Connection Americas User Conference, 2010.
Maricic, L., P. Blelloch, and E. Porth Modeling Reverberant Chamber Effects on Acoustic Test Results. SCLV, 2010.
Miskovish, R.S., P. Shah, S.M. Spottswood. Predicting Snap-Through of a Thin-Walled Panel due to Thermal and Acoustic Loads. 2010 SIMULIA Customer Conference, 2010.
Osterholt, D., and D. Linehan Modal Test and Suspension Design for the Orion Launch Abort System. 28th International Modal Analysis Conference (IMAC), Jacksonville, Florida, February 2010.
Rands, C., and D. Gregg Using a FEM-Derived Sensitivity Matrix to Compute Loads from Strain Data. Siemens PLM Connection Americas User Conference, 2010.
Rupp, C.J., M.L. Dunn, and K. Maute. Analysis of Piezoelectric Energy Harvesting Systems with Non-Linear Circuits Using the Harmonic Balance Method. Journal of Intelligent Material Systems and Structures 21, 2010.
Sprunt, A., A. Slocum, and J.H. Lang. Fracture Fabrication of Precision Single-Crystal Silicon Surfaces for MEMS Devices. Massachusetts Institute of Technology, Cambridge, MA, 2010.
Vold, H., P.N. Shah, J. Davis, P.G. Bremner, D. McLaughlin, P. Morris, J. Veltin, and R. McKinley. High-Resolution Continuous Scan Acoustic Holography Applied to High-Speed Jet Noise. 16th AIAA/CEAS Aeroacoustics Conference (31th AIAA Aeroacoustics Conference), Stockholm, Sweden, Jul 2010.
Yoder, N.C., and D.E. Adams. Vibro-Acoustic Modulation Utilizing a Swept Probing Signal for Robust Crack Detection. Structural Health Monitoring 9, 2010. pp. 257-267.
Allred, B., R. Brillhart, and J. Davis Model Validation of an RSRM Transporter Through Full Scale Operational and Modal Testing. 25th Aerospace Testing Seminar, October 2009.

AWARD

George M. Low Award Recipient

ATA is a proud recipient of the prestigious George M. Low award, NASA’s premier quality
and performance award recognizing contractors for technical and business excellence.

LEARN MORE