Technical Papers

Request a Technical Paper

ATA has been a leader in methods development for design, analysis, and test for more than 45 years.

As a result of this experience, ATA regularly produces technical papers and presents at conferences. Our
technical papers draw on our vast industry experience and cover topics in all areas of ATA business. Learn
more about our work by requesting a technical paper.
Seitz, T., E. Blades, and M. Whitney. Tail Buffet Analysis. Aerospace and Flutter Council Meeting, Apr 2009.
Shah, P.N., D. Mobed, Z.S. Spakovsky, T.F. Brooks, and W.M. Humphreys Jr. Aeroacoustics of Drag-Generating Swirling Exhaust Flows. 13th AIAA/CEAS Aeroacoustics Conference, Rome, Italy, May 21-23, 2009.
Tippmann, J.D., S.C. Prasad, and P.N. Shah. 2-D Tank Sloshing Using the Coupled Eulerian-LaGrangian (CEL) Capability of Abaqus/Explicit. 2009 SIMULIA Customer Conference, 2009.
Whitney, M.J., T.J. Seitz, and E.L. Blades. Low-Speed-Stall Tail Buffet Loads Estimation Using Unsteady CFD. The International Forum on Aeroelasticity and Structural Dynamics, June 2009.
Adams, D.E., B Zwink, and N.C. Yoder. Impact Loading and Damage Identification Using Minimal Dynamic Sensing Strategies. Paper #5049. Proceedings of SAMPE 2008, Long Beach, CA, 2008.
Brillhart, R., K. Napolitano, and D. Osterholt. Utilization of Alias Free Polyreference for Mixed Mode Structures. 26th International Modal Analysis Conference (IMAC), Orlando, FL, Feb 2008.
Cunningham, T., and D. Hensley. Case Study: How to Make an Analysis Interface That Both the Novice and the Expert Will Use. NA Regional Summit 2008 NAFEMS, Hampton, VA, Oct 2008.
Evgrafov, A., C.J. Rupp, M.L. Dunn, and K. Maute. Optimal Synthesis of Tunable Elastic Wave-Guides. Computational Methods in Applied Mechanical Engineering, 2008.
Larmignat, S., D. Vanderpool, H. Kei Lai, and L. Pilon. Rheology of Colloidal Gas Aphrons (Microfoams). 2008.
Pray, C., P. Blelloch, G. Thomas, M. McNelis, V. Suarez, and K. Otten. Structural Dynamics Analysis of a Spacecraft Multi-DOF Shaker Table. 2008.
Sevier, M., H.T.Y. Yang, W. Moscoso and S. Chandrasekar. Analysis of Severe Plastic Deformation by Large Strain Extrusion Machining. 2008.
Vanderpool, D., J. Hwan Yoon, and L. Pilon. Simulations of a Prototypical Device Using Pyroelectric Materials for Harvesting Waste Heat. International Journal of Heat and Mass Transfer, 2008.
Vold, H., M. Richardson, K. Napolitano, and D. Hensley. Aliasing in Modal Parameter Estimation – A Historical Look and New Innovations. IMAC, Jan 2008.
White, C.V., K. van der Walde, and J. Tippman. An Experimental Investigation of the Dynamics of the MSL Rover Landing Event. 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials, Schaumburg, IL, April 7-10, 2008.
Yoder, N.C., and D.E. Adams. Detection of Cracks in Complex Aerospace Components Using Nonlinear Methods. Proceedings of the 2nd Asian-Pacific Workshop on Structural Health Monitoring, Melbourne, Australia, 2008.
Yoder, N.C., D.E. Adams, and M. Triplett. Multidimensional Sensing for Impact Load and Damage Evaluation in a Carbon Filament Wound Canister. Materials Evaluation, 66, No. 7, 2008. pp. 756-763.

AWARD

George M. Low Award Recipient

ATA is a proud recipient of the prestigious George M. Low award, NASA’s premier quality
and performance award recognizing contractors for technical and business excellence.

LEARN MORE