Technical Papers

Request a Technical Paper

ATA has been a leader in methods development for design, analysis, and test for more than 40 years. As a result of this experience, ATA regularly produces technical papers and presents at conferences. Our technical papers draw on our vast industry experience and cover topics in all areas of ATA business. Learn more about our work by requesting a technical paper.

Schwartz, D., D-J. Kim, P. Stupar, J. DeNatale, and R.T. M’Closkey. Modal Parameter Tuning of an Axisymmetric Resonator via Mass Perturbation. IEEE Journal of Microelectromechanical Systems, No. 99, 2015. Highlighted as a JMEMS RightNow Paper.
Shah, P.N., H. Vold, D. Hensley, E. Envia, and D. Stephens. A High-Resolution Continuous-Scan Acoustic Measurement Method for Turbofan Engine Applications. Journal of Turbomachinery 137, December 2015.
Sorbom, B.N., J. Ball, T.R. Palmer, et al. ARC: A Compact, High-Field, Fusion Nuclear Science Facility and Demonstration Power Plant with Demountable Magnets. Fusion Engineering and Design 100, November 2015, pp. 378-405.
Walters, D. K., P. Shah, D. Berg, and E.A. Luke. Investigation of Dynamic Hybrid RANS-LES Modeling for Compressible Turbulent Flows. 1st Thermal and Fluid Engineering Summer Conference, New York, NY, August 2015.
Antoun, G.G., and C. Briggs. Using Abaqus to Enable Accurate Stress Predictions of a Multi-Body System with Sliding Contact. 2014 SIMULIA Community Conference, 2014.
LeBlanc, B. , D. Cloutier, T. Marinone. Overview of the Dynamic Characterization at the DOE/SNL SWiFT Wind Facility. Society of Experimental Mechanics – International Modal Analysis Conference, Orlando, FL, Feb 2014.
Marinone, T., D. Cloutier, and B. LeBlanc. Modal Testing and Model Validation Issues of SWiFT Turbine Tests. Society of Experimental Mechanics—International Modal Analysis Conference, Orlando, FL, Feb 2014.
Marinone, T., D. Cloutier, B. LeBlanc, T. Carne, and P. Andersen. Artificial and Natural Excitation Testing of SWiFT Vestas V27 Wind Turbines. International Modal Analysis Conference, Orlando, Florida, February 2014.
Marinone, T., D. Cloutier, K. Napolitano, and B. LeBlanc. Comparison of Multiple Mass Property Estimation Techniques on SWiFT Vestas V27 Wind Turbine Nacelles and Hubs. Society of Experimental Mechanics—International Modal Analysis Conference, Orlando, FL, Feb 2014.
Mayes, R.L., and D.W. Linehan. Measuring Effective Mass of a Circuit Board. 32nd International Modal Analysis Conference: Conference and Exposition on Structural Dynamics, Orlando, FL, Feb 2014.
Napolitano, K.L., and N.C. Yoder. Optimal Phasing Combinations for Multiple Input Source Excitation. Proceedings of the 32nd International Modal Analysis Conference, Orlando, FL, Feb 2014.
Reveles, N., and M. Smith. Analysis of Aeroelastic Rotors using Hybrid-CFD Techniques. Fifth Decennial AHS Aeromechanics Specialists’ Conference, San Francisco, CA, Jan 2014.
Sayer, R.A., S.L. Hodson, T.P. Koehler, R.J. Cordova, T.C. Marinone, and J.R. Serrano. Vibration Transmission Across Carbon Nanotube and Metallic Foil Thermal Interface Materials for Space Applications. 38th Vibration Institute Annual Training Conference 2014, San Antonio, Texas, June 2014.
Shah, P.N., H. Vold, D. Hensley, E. Envia, and D. Stephens. A High-Resolution Continuous-Scan Acoustic Measurement Method for Turbofan Engine Applications. Proceedings of the ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, Düsseldorf, Germany, June 16-20, 2014.
Stephens, D.B., and H. Vold. Order Tracking Signal Processing for Open Rotor Acoustics. Journal of Sound and Vibration 333, 2014..
Blades, E., P. Shah, M. Nucci, and S. Miskovish. Demonstration of Multiphysics Analysis Tools on Representative Hypersonic Vehicle Structures. AIAA 2013-1746. 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2013.
Blades, E.L., and J.C. Newman III. Computational-Fluid-Dynamics-Based Design Optimization of a Large Asymmetric Payload Fairing. Journal of Spacecraft and Rockets 50, No. 5 (2013): pp. 1013-1023.
Blades, E.L., P. Shah, M. Nucci, S. Miskovish. Multiphysics Simulations of Representative Hypersonic Vehicle Structures. 2013 Simulia Customer Conference, 2013.
Hensley, D., G. Antoun, B. Fladung, K. Napolitano. Using the IMAT Toolbox in the Modal Test Process. Sound and Vibration, Jun 2013.

AWARD

George M. Low Award Recipient

ATA is a proud recipient of the prestigious George M. Low award, NASA’s premier quality
and performance award recognizing contractors for technical and business excellence.

LEARN MORE