ATA Engineering and Siemens Present: Digital Image Correlation
This seminar will answer questions such as the following:
- What is digital image correlation (DIC), and how would it be useful to my company?
- What equipment would I need to use this technology?
- How does this technology compare to traditional methods for measuring strain, such as using strain gages?
- Can I use DIC for dynamic applications, and if so, what is the frequency range over which it would be applicable?
This free event will start with a presentation on the basic principles of DIC. To supplement the lectures, there will be live demonstrations of the Simcenter Testlab software for DIC processing and analysis on a sample structure. Morning refreshments and lunch will be provided.
SEMINAR AGENDA
View the detailed agenda here.
8:00 a.m. | Welcome and Coffee |
8:15 a.m. | Introduction to Digital Image Correlation |
8:45 a.m. | DIC Measurement Setup |
9:15 a.m. | DIC Measurement Parameters |
9:45 a.m. | Break |
10:00 a.m. | Quasi-static Application – Test Setup with Low-Speed Cameras |
10:30 a.m. | Quasi-static Application – Image Acquisition |
11:00 a.m. | Quasi-static Application – Data Processing |
11:30 a.m. | Quasi-static Application – Data Analysis |
12:00 p.m. | Lunch |
1:00 p.m. | Vibration Application – Test Setup with High-Speed Cameras |
1:30 p.m. | Vibration Application – Image Acquisition |
2:00 p.m. | Vibration Application – Data Processing & Analysis |
3:00 p.m. | Break |
3:15 p.m. | Finite Element Model Correlation |
3:45 p.m. | Open Discussion and Conclusions |
4:15 p.m. | Wrap-Up |
VENUE
ATA Engineering, Inc.
13290 Evening Creek Drive
San Diego, CA 92128
(858) 480-2000
ARRIVAL INSTRUCTIONS
Please park in any of the unreserved parking spots. Enter through the front glass doors and take the elevator or stairs to ATA Engineering reception on the second floor.
ABOUT THE SPEAKERS
William Flynn
Senior Application Engineer, Siemens Digital Industries Software
William (Bill) Flynn is a senior application engineer at Siemens Digital Industries Software. He works in the West Coast office located in Costa Mesa, California. Mr. Flynn has worked with Siemens (formerly LMS) in this capacity for over 30 years. His main background is in modal testing, vibration control, and multiaxis control, focused mainly in the aerospace and defense industry.
Mr. Flynn was previously employed with the former McDonnell Douglas Company working in the Flutter and Dynamics group, coordinating the ground vibration tests and performing flutter testing and analysis of large aircraft. He also spent a few years at Polytec working with laser vibrometers for vibration testing.
Tim Marinone
Senior Project Engineer, ATA Engineering, Inc.
Tim Marinone is a senior project engineer at ATA Engineering. He has a bachelor’s degree and a master’s degree in mechanical engineering from the University of Massachusetts Lowell. Since 2012, Mr. Marinone has worked at ATA Engineering as a test engineer with a focus on vibration and modal testing.
Dave Cloutier
Senior Project Engineer, ATA Engineering, Inc.
Dave Cloutier is a senior project engineer at ATA Engineering. He has a bachelor’s degree and a master’s degree in mechanical engineering from the University of Massachusetts Lowell, with a focus on structural dynamics. Mr. Cloutier is a member of ATA’s test group and has been actively involved in dynamic testing of a wide variety of aerospace structures
Jon Furlich
Project Engineer, ATA Engineering, Inc.
Jon Furlich is a project engineer at ATA engineering. He has a bachelor’s degree, a master’s degree, and a doctoral degree in mechanical engineering from Michigan Technological University. He joined ATA in 2020, supporting clients with test and engineering services related to the modal analysis community, aerospace, and entertainment industries