Technical Papers

Request a Technical Paper

ATA has been a leader in methods development for design, analysis, and test for more than 40 years. As a result of this experience, ATA regularly produces technical papers and presents at conferences. Our technical papers draw on our vast industry experience and cover topics in all areas of ATA business. Learn more about our work by requesting a technical paper.

Ostoich, C.M., D.J. Bodony, and P.H. Geubelle. Fluid–Thermal Response of Spherical Dome Under a Mach 6.59 Laminar Boundary Layer. AIAA Journal 50, No. 12, December 2012.
Reynante, B.M., and P.A. Lagace. Probabilistic Aspects of Damage Progression in Composite Structures. Proceedings of the American Society for Composites 27th Technical Conference, Arlington, TX, Oct 2012.
Rupp, C.J., and G. Antal. Implementation of an Efficient RMS Algorithm for Random Analysis in Vibrata. Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference. Aug 2012.
Shah, P.N., T. Waniewski-Sur, R.S. Miskovish, and A. Robinson. Theoretical and Computational Analysis of an Auxiliary Power Unit (APU) Installation Cooling System. Proceedings of ASME Turbo Expo, Copenhagen, Denmark, Jun 2012.
Thibault, L., T. Marinone, P. Avitabile, and C. Van Karsen. Comparison of Modal Parameters Estimated from Operational and Experimental Modal Analysis Approaches. Proceedings of the SEM IMAC XXX Conference, Jacksonville, FL, Jan 30–Feb 2, 2012.
Vold, H., P. Shah, P. Morris, Y. Du, and D. Papamoschou. Axisymmetry and Azimuthal Modes in Jet Noise. 18th AIAA/CEAS Aeroacoustics Conference (33rd AIAA Aeroacoustics Conference), Colorado Springs, CO, Jun 4-6, 2012.
White, C., C.-Y. Peng, S.-S. Lih, G. Antoun, and J. Tippmann. Analysis and Test Validation to Develop Mars Science Laboratory EDL Loads – Mobility Deploy Event. AIAA 53rd Structures, Structural Dynamics, and Materials Conference, Honolulu, HI, 2012.
White, C., G. Antoun, P. Brugarolas, S. Lih, C. Peng, L. Phan, A. San Martin, S. Sell, and G. Singh. System Verification of MSL Skycrane Using an Integrated ADAMS Simulation. IEEE Aerospace Conference, Big Sky, MT, Mar 3-10, 2012.
Yoder, N.C., and K.L. Napolitano. Fixed Base FRF Using Boundary Measurements as References—Experimental Results. 30th International Modal Analysis Conference, Jacksonville, Florida, January–February 2012.
Baker, M., and C. Pray. Understanding Critical Dynamic Loads for Nozzle and Nozzle Extension Design. 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, July 31-Aug 3, 2011.
Blades, E., E. Luke, A. Kurkchubashe, E. Collins, and S. Miskovich. A Fluid-Structure Interaction Simulation Capability Using the Co-Simulation Engine. Proceedings of the SIMULIA Customer Conference, May 2011.
Blades, E., S. Miskovish, E. Luke, E. Collins, and A. Kurkchubashe. A Multiphysics Simulation Capability Using the SIMULIA Co-Simulation Engine. AIAA-2011-3397. 20th AIAA Computational Fluid Dynamics Conference, 2011.
Blades, E.L., R.S. Miskovish, M. Nucci, P. Shah, P.G. Bremner, and E.A. Luke. Towards a Coupled Multiphysics Analysis Capability for Hypersonic Vehicle Structures. AIAA-2011-1962. 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2011.
Blelloch, P.A., M.Y. Yang. Simulating Response of Lightweight Reflectors to Acoustic Tests. SAE 2011 Aerotech Congress and Exhibition, Toulouse, France, 2011.
Brillhart, R., and K. Napolitano. Aircraft GVT Advances and Application – Gulfstream G650. 29th International Modal Analysis Conference, February 2011.
Brillhart, R., K. Napolitano, and T. Duvall. Aircraft Dynamics And Payload Interaction – SOFIA Telescope. 29th International Modal Analysis Conference, Jacksonville, Florida , February 2011.
Deines, K., T. Marinone, R. Schultz, K. Farinholt, and G. Park. Modal Analysis and SHM Investigation of CX‐100 Wind Turbine Blade. Proceedings of the 29th IMAC, A Conference on Structural Dynamics, 2011.
Fladung, W., and G. Hoople. An Integrated Procedure for Estimating Modal Parameters During Flight Testing. 29th International Modal Analysis Conference, Jacksonville, Florida, March 2011.
Heeg, J., J. Ballmann, K. Bhatia, E. Blades, et al. Plans for an Aeroelastic Prediction Workshop. Proceedings of the International Forum on Aeroelasticity and Structural Dynamics, Paris, France, June, 2011.

AWARD

George M. Low Award Recipient

ATA is a proud recipient of the prestigious George M. Low award, NASA’s premier quality
and performance award recognizing contractors for technical and business excellence.

LEARN MORE