Technical Papers

Request a Technical Paper

ATA has been a leader in methods development for design, analysis, and test for more than 40 years. As a result of this experience, ATA regularly produces technical papers and presents at conferences. Our technical papers draw on our vast industry experience and cover topics in all areas of ATA business. Learn more about our work by requesting a technical paper.

Oosthuizen, P.H., and M. Garrett. A Numerical Study of Natural Convective Heat Transfer from a Vertical Plate with a ‘Wavy’ Surface. Proceedings of the 18th Canadian Congress of Applied Mechanics, St. John’s, Newfoundland, Canada, 2001.
Oosthuizen, P.H., and M. Garrett. A Numerical Study of Three-Dimensional Natural Convective Heat Transfer from a Plate with a ‘Wavy’ Surface. Paper #IMECE2001/HTD-24112. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, New York, NY, Nov 2001.
Oosthuizen, P.H., and M. Garrett. A Numerical Study of Natural Convective Heat Transfer from an Inclined Plate with a ‘Wavy’ Surface. Proceedings of the ASME, Anaheim, CA, Jun 2001.
Spievak, L.E., P.A. Wawrzynek, A.R. Ingraffea, and D.G. Lewicki. Simulating Fatigue Crack Growth in Spiral Bevel Gears. Engineering Fracture Mechanics, 2001.
Waniewski Sur, T.A., C.E. Brennen, and F. Raichlen. Measurements of Air Entrainment by Bow Waves. Journal of Fluids Engineering, Mar 2001.
Baker, M. Using Test and Analysis to Drive Design. 19th Aerospace Testing Seminar, Manhattan Beach, CA, Oct 2000.
Birur, G.C., K.R. Johnson, K.S. Novak, and T.W. Sur. Thermal Control of Mars Lander and Rover Batteries and Electronics Using Loop Heat Pipe and Phase Change Material Thermal Storage Technologies. 30th International Conference on Environmental Systems, Toulouse, France, Jul 2000.
Blades, E., and G. Redgrave. Captive Carry Flutter Analysis for the X-34 reusable Launch Vehicle. AIAA-2000-1778. 41st Structures, Structural Dynamics, and Materials Conference and Exhibit, 2000.
Blelloch, P., and C. Coe. Buffet Simulation for the Kistler K-1 Launch Vehicle. 41st AIAA/ASME/ASCE/AHS/ASC SDM Conference, Atlanta, GA, Apr 2000.
Blelloch, P., E. Blades, and T. Dragone. Modeling and Correlation of the X-34 Launch Vehicle. AIAA-2000-1777. 41st Structures, Structural Dynamics, and Materials Conference and Exhibit, 2000.
Blelloch, P.A., E.L. Blades, and R.D. Brillhart. Modeling and Correlation of the X-34 Launch Vehicle. 18th International Modal Analysis Conference, San Antonio, TX, Feb 2000.
Brillhart, R.D., and J.C. Akers. Multiple Configuration Ground Vibration Testing – X-34 and L-1011 Carrier Aircraft. 18th International Modal Analysis Conference, San Antonio, TX, Feb 2000.
Brillhart, R.D., D.P. Hensley, and R.H. Jenkins. Scanning for Test Configuration Automation. 18th International Modal Analysis Conference, San Antonio, TX, Feb 2000.
Deiters, T.A., M. Baker, K.C. Indermuehle, and C.W., Engelhardt. Using Analysis to Design for Drop or Other Shock Environments. 18th International Modal Analysis Conference, San Antonio, TX, February 2000.
Fladung, W.A., A.W. Phillips, R.J. Allemang. Introduction of a General User Excitation Source Signal for Modal Testing. International Modal Analysis Conference, 2000.
Hensley, D.P., and T.J. Cunningham. Using IMAT and MATLAB for Coriolis Flowmeter Design. IMAC XLX Conference on Structural Dynamics, Kissimmee, FL, 2000.
Lewicki, D.G., L.E. Spievak, and R.F. Handschuh. Consideration of Moving Tooth Load in Gear Crack Propagation Prediction. Jul 2000.
Pray, C., S.A. Hambric, T.E. McDevitt, and C.B. Burroughs. Characterization of Folded Beam Waveguide Absorbers for Damping of Flexural Vibrations in a Thick Plate. Institute of Noise Control Engineering, 2000.
Vold, H., B. Schwarz, and M. Richardson. Measuring Operating Deflection Shapes Under Non-Stationary Conditions. IMAC XVIII, Feb 2000.

AWARD

George M. Low Award Recipient

ATA is a proud recipient of the prestigious George M. Low award, NASA’s premier quality
and performance award recognizing contractors for technical and business excellence.

LEARN MORE